Waxedshine Cut Compound

€ 11,95

Waxedshine Cut Compound is a modern formulation enabling fast paint leveling. Cut Compound is designed utilizing nano abrasive technology to remove P1000+ sanding marks and finer depending on the pad choice. Cut Compound uses a superior formulation providing a high gloss, haze free finish with easy clean-up and very little swirling. Cut Compound is body shop safe and VOC compliant. Compatible with Rotary and Da Polishers, wool, microfiber and foam pads

HOW TO USE

1) Shake well before use.

2) Using a clean pad, add 4 pea sized drops to the pad. Place the pad on the panel and at a very low speed hold it in the same spot running the machine for around 5 seconds. This will help the product spread evenly into the pad and not sling.

3) Working in a 2ft x 2ft area, start at a lower speed and evenly spread the product.

4) Slowly pass the work area utilizing a crosshatch pattern. Once you have completed the first pass, speed up the machine, use light pressure and faster movements.

5) After you have completed a full pass, drop the speed of the machine back down and finesse the area, remove any pressure and polish the area for a final pass.

6) Wipe off using a clean microfiber towel and inspect the area, if needed repeat the previous steps until the desired finish is achieved.

7) For a final (optional) step follow up with Waxedshine Fine Polish on a finishing foam pad for that extra level of gloss.